PVC贴纸机

贴纸机（覆膜机）适用于各种密度板、中纤板、防火板的表面上贴上各种颜色的木纹纸、免漆纸、铝箔纸等。本机自动涂胶、烤胶、贴面、冷压、热压、切断连续作业，具有自动化程度高、贴面效果好，无需再用其它设备加压，是贴面石膏板厂、装饰材料公司板材装饰贴面贴膜的理想设备。

使用范围：本贴纸机生产线是专门为在平面板材（如：密度板，刨花板，铁板，石膏板，大理石板等）板材的上表面贴PVC 装饰纸，油漆纸而设计，具有贴面平，不起跑，不起皱，效率高的特点。

1、本机集本除尘器，涂胶，贴纸，自动切纸，热压以及冷压于一体。

2、胶辊和上压辊采用气压升降，台湾变频传动。

3、涂胶采用超越离合装置。

APPLICATION:

The paper sticking series are used to laminate the volumed decorative paper, the volumed PVC or the volumed protecting film on the surface of plan boards such as the MDF, the particleboard, the plasterboard and so on without bubble or wrinkle and with high efficiency.

  The features:

1. It can finish the dust collection, the glue spraying, the paper sticking, the hot and cold press successively with high efficiency.

2. The rolls rising is contrals by pneumatic lifting system

3. The glue coating system adopts the overrunning clutch. 

4. Following the glue coating, there is a heating system which used to dry the glue. What is more the conveying length after the glue coating part is 3000mm which is long enough to take the board out if the glue coating result is not perfect

5, there are three heating pressing roller and double cold pressing roller which make good pressing result without the wrinkle and bubble

6. The loading part is 2500mm and the unloading part is 3000mm